Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Wheel size | 17 " |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Scope | 1006 mm |
| Mounting type | Nuts & bolts |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Total length: 145 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm
12,80 EUR
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Mounting type: Nuts & bolts
70,50 EUR
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Hole spacing: 19 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Wheel size: 17 " · Wide intake: 65 mm · Distance mudguard - center hole: 315 mm · Number of fixing points: 5 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Total length: 325 mm · Mounting type: Nuts & bolts
15,20 EUR
Mudguard strut 16" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Wheel size: 16 " · Wide intake: 75 mm · Distance mudguard - center hole: 290 mm · Number of fixing points: 5 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Total length: 305 mm · Mounting type: Nuts & bolts
21,10 EUR
GPO license plate holder Inox black (CH version)
Width: 105 mm · Height: 6 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: black-matt · Surface: varnished · Thread type: M5x0.8 (standard thread) · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm · Total length: 147 mm · Mounting type: Nuts & bolts
15,20 EUR
Explore categories from Mudguard
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Total length: 145 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm
12,80 EUR
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Ø outside: 5 mm · Number of components: 2 pcs · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
2,35 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
13,50 EUR
30,00 EUR/l
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain lock type: Spring lock · Rolling circumference: 1448 mm · Ø bore: 4.05 mm · Ø Pin: 4 mm
22,20 EUR
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Nipple length: 10 mm · Piaggio OEM number: 270460
2,80 EUR
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Ø inside: 2.5 mm · Ø outside: 5 mm · Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Material: Steel · Color: black · Area of application: Standard · Total length: 6000 mm · Coating: none · Ø cable: 2.2 mm
14,00 EUR
2,33 EUR/m
Hot
Manual indoor cable set
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
11,70 EUR
ESJOT Gear Ring, 37 Teeth, Reverse, Galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø inside: 94 mm · Number of teeth: 37 pcs · Ø bolt circle: 105.5 mm · Thickness: 4.1 mm · Ø mounting hole: 6.5 mm · Hole spacing: 74 mm · Number of fixing points: 4 pcs
56,40 EUR
swiing® revival air filter Racing | Sachs 503
Width: 68 mm · Manufacturer: swiing® revival parts · Mounting type: Plug connection clamped · Material: Plastic · Area of application: Tuning · Filter type: Racing screen · Height: 52 mm · Ø Internal connection: 20 mm · Camouflaged: No · Total length: 165 mm · Color: black
70,50 EUR
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Mounting type: Nuts & bolts
70,50 EUR
Working late? Evening hours on Thursday until 20:00
