Racing clutch compatible with your Puch Maxi S / N moped with an E50 engine.
This high-quality centrifugal clutch is suitable for racing and tuning applications. The clutch consists of three clutch plates and features a reinforcement plate that significantly increases stability. With the three included spring strengths, the engagement characteristics can be adjusted to suit various engine setups. The weakest springs are already installed.
Package contents:
• Racing clutch, 409 gr
• White clutch spring set with 1.5 mm wire diameter
• Green clutch spring set with 1.6 mm wire diameter
• Yellow clutch spring set with 1.7 mm wire diameter
Notes: The clutch should be soaked in oil for 24 hours before installation so that the friction plates can become saturated with oil. After selecting the appropriate clutch springs for your engine, the M6 countersunk screws on the racing clutch must be secured with medium-strength threadlocker and tightened to 6 Nm.
You can find the appropriate oil and threadlocker among the accessories.
High-quality product from the American manufacturer Jammer Clutches.
Alternative to the original Puch part number: 349.1.12.504.0
| Manufacturer | Jammer |
| Material | Steel |
| Area of application | Tuning |
| Material addition | Composite materials |
| Surface | burnished |
| Ø inside | 12.5 mm, 13.9 mm |
| Recording type | Cone mounting |
| Ø outside | 92 mm |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Thickness | 19.75 mm |
| Alternative version of the Puch OEM number | 349.1.12.504.0 |
| Puch | E50 |
Accessories & related products
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Height: 8 mm · Width across flats: 17 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon · Thread type: MF10x1 (fine pitch thread)
4,60 EUR
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,80 EUR
2 580,00 EUR/l
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Color: red · Color: white · Color: yellow · Material: Spring steel · Surface: varnished · Total length: 32.6 mm · Area of application: Tuning
35,20 EUR
GPO clutch spring set Jammer clutch "Stage 1" pink
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.1 mm · Ø inside: 7.7 mm · Manufacturer: GPO · Ø outside: 9.9 mm · Total length: 34 mm · Color: pink · Material: Spring steel · Surface: varnished · Area of application: Tuning
14,00 EUR
GPO clutch spring set Jammer clutch "Stage 2" blue
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.3 mm · Ø inside: 7.3 mm · Manufacturer: GPO · Ø outside: 9.9 mm · Total length: 34 mm · Color: blue · Material: Spring steel · Surface: varnished
14,00 EUR
Explore categories from Clutch
Working late? Evening hours on Thursday until 20:00
