Clutch springs in three thicknesses for the Jammer clutch on your Puch and Tomos moped / moped.
As the original springs tend to break, they can be replaced by Malossi springs.
The springs are supplied in 3 thicknesses:
Weak (white): 2.25 mm, 32.65 mm
Medium (yellow): 2.28 mm, 32.3 mm
Strong (red): 2.42 mm, 32.0 mm
We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
You can find more clutch springs in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Spring design | Tension spring |
| Ø wire | 2.2 mm, 2.3 mm, 2.4 mm |
| Manufacturer | Malossi |
| Material | Spring steel |
| Surface | varnished |
| Color | white, yellow, red |
| Total length | 32.6 mm |
| Area of application | Tuning |
| Puch | E50 |
| Tomos |
Accessories & related products
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Ø outside: 92.5 mm · Manufacturer: Jammer · Area of application: High End · Area of application: MX · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Steel · Thickness: 19 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
222,60 EUR
Not in stock
Jammer clutch 1st gear | Tomos A35, A55
Manufacturer: Jammer · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 3 pcs · Tomos OEM number: 227849
222,60 EUR
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 94 mm · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Thickness: 4.5 mm · Number of teeth: 45 pcs · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm
23,30 EUR
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: gray · Carburetor type: SRE · Nominal diameter: 12 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 65 mm · Width: 50 mm · Height: 108 mm · Area of application: Standard · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
81,90 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
swiing® ingenious pull starter | Puch E50 MVT ignition
Height: 82 mm · Width: 150 mm · Ø outside: 130 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ignition system: MVT Allumage · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Total length: 170 mm
175,70 EUR
Not in stock
Collection only possible with online purchase and appointment.
