High-end CNC aluminum transmission cooler for your moped / moped with Puch E50 engine.
Thanks to improved cooling, the clutch works more stress-free. However, this technical miracle also lowers the temperature at the cylinder head.
All components from your original engine can be used, only the cooling fin is fitted in between. Due to the different threads, you have a variety of connection options, such as a temperature sensor.
The following components are included in the scope of delivery:
1x cooling fin, black anodized aluminium
2x seal
1x aluminium bushing
3x O-ring seal
1x hose nozzle
1x circlip / retaining ring
4x countersunk hexagon socket screws M6 x 55 (fastening of cooler / coupling cover)
| Material | Aluminum |
| Surface | anodized |
| Color | black-matt |
| Width | 32 mm |
| Ø inside | 107 mm |
| Ø outside | 150 mm |
| Puch | E50 |
Accessories & related products
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
11,70 EUR
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Number of fixing points: 2 pcs · Ø outside: 130 mm · Hole spacing: 138 mm · Height: 80 mm · Width: 150 mm · Total length: 170 mm
176,40 EUR
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.9 mm · Total length: 106 mm · Nominal diameter (thread): 6 mm · Surface: galvanized (blue) · Width across flats: 10 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,70 EUR
PVL Analog Ignition Coil 105458 / 458115
Manufacturer: PVL · Color: black · Place of use: External (outside the ignition) · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 6 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
116,40 EUR
PVL stator "1443" ignition
Manufacturer: PVL · Material: Aluminum · Number of cables: 2 pcs · Color: black · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
116,40 EUR
Hot
GPO fuel tap horizontal M12x1 (with union nut) bottom outgoing | Puch Maxi S, N
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread) · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
11,70 EUR
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm oval / straight
Manufacturer: Polini · Material: Foam · Material: Rubber · Color: black · Color: blue · Mounting type: Plug connection clamped · Mounting type: Screwed clamp · Filter type: Foam · Length rubber part: 13 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Height: 100 mm · Width: 150 mm · Camouflaged: No · Total length: 140 mm · Area of application: Tuning
70,50 EUR
Working late? Evening hours on Thursday until 20:00
