Left and right replacement lever suitable for Lusito grip units on your moped, moped or small motorcycle.
The brake levers have a smooth contour and no recesses for the fingers.
Length at the pivot point: 130 mm
Ø for lever bolt: 8.1 mm
Ø for mounting nipple: 8.9 mm
Material: aluminum
Note: Before final assembly, check that the mounting nipple is properly inserted and can move freely.
Cast residue from production may still be present in the area of the cable duct, which can be easily removed with a file.
| Ø inside | 8.9 mm |
| Manufacturer | Lusito |
| Material lever | Aluminum |
| Color | silver |
| Total length | 130 mm |
| Number of fixing points | 1 pcs |
Ratings
Accessories & related products
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple length: 12 mm · Area of application: Standard
2,85 EUR
Lusito handle set automatic aluminum black (short gas)
Manufacturer: Lusito · Material: Rubber · Housing material: Aluminum · Surface: powder-coated · Material lever: Aluminum · Ø inside: 22 mm · Ø inside: 24 mm · Total length: 130 mm · Total length: 150 mm · Color: black · Color: orange · Color: silver · Number of components: 6 pcs
59,10 EUR
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple length: 10 mm · Area of application: Standard
2,85 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Total length: 6 mm
2,35 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm
15,30 EUR
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
50,80 EUR
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Total length: 25 mm · Ø outside: 11 mm · Thread length: 19.5 mm · Area of application: Standard · Width across flats: 11 mm · Number of components: 6 pcs
4,60 EUR
Brake cable Ø 1.8 mm x 185 cm (nipple ball)
Ø Stranded wire: 1.8 mm · Cable length: 1850 mm · Nipple shape: Ball · Ø nipple: 5.8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple length: 6.3 mm · Area of application: Standard
2,85 EUR
Collection only possible with online purchase and appointment.
