Sealing washer 5 x 10 x 2 mm for the carburetor flange of Bing SSB carburetors, which are installed on Sachs 502, 50/2, 50/3, 50/4 mopeds / mopeds.
The washer acts as an insulating washer to keep heat away from the carburetor and also as an additional sealing washer.
The aluminium washer has an EPDM rubber ring vulcanized onto it. This fits perfectly against the sealing surface and encases the stud bolt.
Ø inner: 4.6 - 5.7 mm
Ø outer: 10 mm
Height: 2.9 mm
Material: aluminum & EPDM rubber
Price per piece.
Original Sachs spare part number: A1829
| Material | Aluminum, EPDM - Rubber |
| Nominal diameter inside | 5 mm |
| Nominal diameter (thread) | 5 mm |
| Pony OEM number | A1829 |
| Sachs OEM no. | 0250 089 000 |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) |
Accessories & related products
Cap nut M5 Inox
Material: Chrome steel (colloquially known as stainless steel) · Nut type: Cap nut · Nominal diameter (thread): 4 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread)
0,95 EUR
Serrated lock washer M5 galvanized
Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
0,35 EUR
Hot 
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Nominal diameter: 13 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Nozzle size: 75 · Mounting type: Flange · Hole spacing inlet: 31 mm · Total length: 132 mm · Width: 87 mm · Height: 85 mm · Area of application: Standard · Area of application: Tuning
149,30 EUR
Explore categories from Screws & fastener sets
Moped fans also bought
M10 sealing ring Fiber
Material: Fiber · Surface: raw · Place of use: Carburetor · Place of use: Motor housing · Ø inside: 10 mm · Ø outside: 13.8 mm · Thickness: 1.6 mm · Area of application: Standard · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000 · Puch OEM number: 27071 · Pony OEM number: A1817 · Pony OEM number: A5650
1,90 EUR
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 4.9 mm · Nominal diameter (thread): 5 mm · Thread length: 6 mm · Thread length: 12 mm · Thread type: M5x0.8 (standard thread) · Total length: 23 mm · Area of application: Standard · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102 · Pony OEM number: A3700
2,10 EUR
swiing® revival gasket 0.4 mm gearbox cover | Sachs 502, 50/2, 50/3, 50/4 (A1827)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Total length: 210 mm · Width: 130 mm · Thickness: 0.4 mm · Number of fixing points: 5 pcs · Pony OEM number: A1827 · Sachs OEM no.: 0250 087 100
6,95 EUR
swiing® revival stud bolt set M5x26 inlet (10.9 strength) | Sachs 50/2, 502, 50/3
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Thread length: 7 mm · Thread length: 14 mm · Drive: External hexagon · Thread type: M5x0.8 (standard thread) · Width across flats: 8 mm · Strength class: 8 · Strength class: 10.9 · Total length: 26 mm
6,70 EUR
Working late? Evening hours on Thursday until 20:00
