Complete standpipe set suitable for Puch Maxi S & N mopeds / mopeds.
The set consists of left & right fork leg, spring inserts, cover sleeves, rubber springs and sliding bushes.
Ø fork leg: 23 mm
Block for brake anchor plate: 74 x 16/8 x 16 mm (LxWxH)
Total length: 495 mm
Below block to below fork leg: 46 mm
Spring length incl. insert: 210 mm. Insert: 210 mm
Note: This is a cheap reproduction product that cannot be compared with the original fork legs.
The springs are slightly longer, which means that the sliding bush protrudes slightly from the steerer tube. In addition, the welded-on tab on the fork leg may need to be compressed slightly so that it fits into the brake anchor plate.
Accessories for the dip tubes such as reinforced springs can be found in the accessories section.
Good-quality reproduction product from the Asian market.
| Manufacturer | Quenching |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Adjustable | No |
| Ø spars | 23 mm |
| Total length | 578 mm |
| Distance brake cam to wheel axle center-center | 38 mm |
| Puch |
Accessories & related products
EBR standard fork chrome | Puch
Material: Steel · Surface: chrome-plated · Color: Chrome · Manufacturer: EWC · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 23 mm · Head tube length: 180 mm · Total length: 570 mm · Thread type: MF26x1 (fine pitch thread) · Fork bridge - center wheel axle: 383 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread length: 57 mm
152,30 EUR
66HEROES screw M8x25 fork plate Inox | Puch
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Total length: 29.5 mm · Thread length: 25 mm · Shank: No · Width across flats SW: 17 mm
10,40 EUR
EBR fork with lock black | Puch Maxi
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Thread type: MF26x1 (fine pitch thread) · Color: black · Adjustable: No · Ø spars: 23 mm · Spar end distance (center-center): 120 mm · Ø outer head tube: 26.2 mm · Ø head tube inside: 22.3 mm · Thread length: 57 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 385 mm · Total length: 580 mm · Distance brake cam to wheel axle center-center: 40 mm
187,40 EUR
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
11,60 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
15,10 EUR
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Thread type: MF26x1 (fine pitch thread) · Nut type: Cap nut · Drive: External hexagon · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Thread depth: 12 mm · Width across flats SW: 30 mm · Height: 13.8 mm · Area of application: Standard
11,60 EUR
Collection only possible with online purchase and appointment.
