Strengthening plate made of high-quality stainless steel for the three-jaw centrifugal clutch of your Puch moped / moped with E50 engine.
This precision-manufactured stabilizing plate prevents bending of the clutch shoe mounting bolts, especially on tuned engines, and thus ensures flawless operation, even under high loads.
The scope of delivery consists of the cover plate, three M4 Torx countersunk screws and three retaining rings.
Note: For mounting on original clutches, three M4 threads must first be inserted into the mounting bolts of the base plate.
An alternative reinforcement plate for the 2-jaw clutch, complete engine clutches and other individual parts can be found under accessories.
Quality product from the Austrian manufacturer A.S.P - Puch Parts.
| Manufacturer | ASP |
| Material | Chrome steel (colloquially known as stainless steel) |
| Ø inside | 40 mm |
| Thickness | 1.55 mm |
| Puch | E50 |
Accessories & related products
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Number of jaws: 3 pcs · Thickness: 21.5 mm · Recording type: Cone mounting · Ø outside: 91.5 mm · Number of springs: 6 pcs · Area of application: Racing · Area of application: Tuning
282,30 EUR
Not in stock
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Thickness: 20.9 mm · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Number of jaws: 3 pcs · Ø outside: 93 mm · Recording type: Cone mounting · Area of application: Original · Area of application: Standard
58,70 EUR
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Ø inside: 4.8 mm · Number of components: 3 pcs · Ø outside: 8.3 mm · Total length: 28 mm · Area of application: Tuning
21,10 EUR
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Width: 125 mm · Height: 55 mm · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Total length: 135 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
38,70 EUR
Airsal gasket set 44 - 45 mm | Puch
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
11,70 EUR
swiing® revival stud bolt set M6 x 106 | Puch
Manufacturer: swiing® revival parts · Thread length: 13 mm · Thread length: 18.5 mm · Diameter: 5.9 mm · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nominal diameter (thread): 6 mm · Total length: 106 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,70 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Thickness: 1 mm · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Number of components: 1 pcs · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,60 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
