Black, front mudguard made of stainless steel for your Puch X30 NS, NL, NG-2AH, N-2AH, Puch X30-A, Puch Sprinter and Puch Supermaxi LG1 / LG2 moped / moped.
Since the front mudguard is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury. Furthermore, it is still possible to use an edge protector or splash guard flap. Corresponding holes must still be drilled if required.
All original holes are provided for mounting the side and lower mudguard struts.
To mount cable guides, holes are also already incorporated on both sides of the mudguard.
Note: These are B-grade goods. Unfortunately, the mudguards were insufficiently protected during transportation. Therefore, scratches may be present. The black color should therefore be regarded as a primer rather than a final coat of paint. The folded ends may also have been finished a little more beautifully.
Further parts for your wheel fairing, such as paint polish or fastening material, can be found in the accessories section.
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | varnished |
| Folding the ends | closed folded |
| Color | black |
| Shape of the mudguard | round |
| Mounting type | Nuts & bolts |
| Total length over ends | 560 mm |
| Scope | 700 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 180 mm |
| Wheel size | 17 " |
| Puch |
Ratings
Accessories & related products
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Supermaxi LG1
Manufacturer: swiing® revival parts · Color: Chrome · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: round · Mounting type: Nuts & bolts · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 "
71,00 EUR
swiing® revival 17" front fender "Retro" Inox black | Puch X30 NS, NL, NG-2AH, N-2AH, LG1/LG2
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Folding the ends: closed folded · Color: black · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
71,00 EUR
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Distance mudguard - center hole: 300 mm · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Wheel size: 17 " · Total length: 305 mm · Number of fixing points: 4 pcs · Mounting type: Nuts & bolts
17,70 EUR
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Outer width: 130 mm · Material: Steel · Surface: varnished · Color: black · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Wide intake: 115 mm · Wheel size: 17 " · Hole spacing: 35 mm · Total length: 270 mm · Number of fixing points: 6 pcs · Mounting type: Nuts & bolts
23,60 EUR
Explore categories from Mudguard
Moped fans also bought
GPO chain tensioner | Puch Maxi S
Number of fixing points: 1 pcs · Manufacturer: GPO · Total length: 175 mm · Color: black · Color: silver · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Thread type: M6x1 (standard thread)
11,70 EUR
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Ø inside: 94 mm · Manufacturer: GPO · Color: black · Material: Steel · Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Thickness: 4.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
23,60 EUR
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Cable length: 2200 mm
2,85 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Color: silver · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Total length: 47 mm · Thread length: 50 mm · Total length: 60 mm
15,30 EUR
GPO side bars black matt (1A quality) | Puch Maxi S
Height: 35 mm · Ø mounting hole: 8.1 mm · Manufacturer: GPO · Material: Steel · Surface: varnished · Ø outside: 12.5 mm · Total length: 420 mm · Color: black · Width: 170 mm · Hole spacing: 410 mm · Mounting type: Screws · Number of fixing points: 4 pcs
35,40 EUR
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Distance mudguard - center hole: 300 mm · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Wheel size: 17 " · Total length: 305 mm · Number of fixing points: 4 pcs · Mounting type: Nuts & bolts
17,70 EUR
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Outer width: 130 mm · Material: Steel · Surface: varnished · Color: black · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Wide intake: 115 mm · Wheel size: 17 " · Hole spacing: 35 mm · Total length: 270 mm · Number of fixing points: 6 pcs · Mounting type: Nuts & bolts
23,60 EUR
Collection only possible with online purchase and appointment.
