Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 28 mm |
| Hole spacing | 260 mm |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Ø outside | 44 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,70 EUR
2 570,00 EUR/l
MKX shock absorber 26 cm chrome
Surface: chrome-plated · Color: Chrome · Manufacturer: MKX · Ø outside: 46 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 260 mm · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm
58,50 EUR
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Surface: galvanized (blue) · Surface: nickel-plated · Material: Brass · Material: Steel · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Width across flats SW: 7 mm · Area of application: Standard · Thread length: 7 mm
2,95 EUR
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Bulb holder: BA15d · Housing material: Metal · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Color: transparent · Lens material: Plastic · Mounting type: Screws · Ø outside: 130 mm · Speedometer recording: None · Height: 147 mm · Thread size: M6 · Switch included: No · Battery operated: No · Number of fixing points: 2 pcs · Width: 134 mm · Depth: 80 mm · Area of application: Standard
29,20 EUR
Not in stock
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Mounting type: Union nut · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,60 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Surface: raw · Color: silver · Material: Plastic · Material: Steel · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
15,10 EUR
Collection only possible with online purchase and appointment.
