
The world has never seen pedals like these before!
The solid aluminum pedals can be folded in. This saves you a whole 6 cm.
This may not seem like much, but it can be crucial in tight spaces or during transportation.
With non-slip tread with cams on both sides.
Thread: 9/16"
Length: 115 mm
Width: 85 mm
Height: 27 mm
The reflectors on the sides contribute to road safety.
We recommend mounting the folding pedals with Loctite threadlocker.
In addition, a flat fork wrench is required for assembly.
Both products can be found in the accessories section below.
Price per pair.
Included in delivery are two additional aluminum washers for spacing.
Quality product from the manufacturer wellgo.
| Width | 85 mm |
| Manufacturer | wellgo |
| Material | Aluminum, Plastic |
| Surface | coated |
| Color | black |
| Total length | 115 mm |
| Height | 27 mm |
| Width across flats | 15 mm |
| Reflectors | Yes |
| Thread type | FG14.3 (9/16" 20G) |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,70 EUR
2 570,00 EUR/l
Moped fans also bought
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Surface: galvanized (blue) · Color: black · Color: silver · Material: Plastic · Material: Steel · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Thread type: M6x1 (standard thread) · Number of fixing points: 1 pcs
11,60 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
11,60 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Ø inside: 41 mm · Ø outside: 45 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
3,30 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
15,20 EUR
Transval speedometer drive 16" bracket with grease nipple
Ø outside: 41 mm · Manufacturer: Transval · Material: Aluminum · Color: gray · Place of use: left · Place of use: right · Ø axle: 11 mm · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 11 mm · Thread type: MF10x1 (fine pitch thread) · Wheel size: 16 " · Overall width outside: 50 mm · Total height: 52 mm
32,80 EUR
Dell'Orto 12/12 SHA carburetor hand choke | Piaggio Ciao PX, C24
Nominal diameter: 12 mm · Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Width: 60 mm · Choke control: Hand choke · Carburetor type: SHA (Piaggio) · Total length: 55 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 48 · Ø Inside entrance: 12 mm · Ø Internal connection: 16 mm · Ø Output inside: 12 mm · Height: 110 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 50.6 mm · Mixed oil connection: No · Area of application: Tuning · Vacuum connection: No · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No
76,30 EUR







