Crank arms made of raw, untreated steel, compatible with the Puch Maxi, Puch Supermaxi, Puch X30 NS/NL, Puch X30 NG-2AH, Velux, etc. mopeds, as well as for universal use.
The pedal arms feature a classic retro look and are therefore ideal for custom modifications.
See Figure 4 for dimensions:
- Crank length X (center of axle to center of thread): 156 mm
- Total length Y: 181 mm
- Offset Z: 52 mm
- Axle mounting diameter: 16 mm
Note: 9.5 mm crank wedges must be used for mounting. To protect the crank arms from rust, they should be sealed.
You can find crank wedges and pedals in the accessories section.
| Material | Steel |
| Surface | raw |
| Crank length (center-center) | 156 mm |
| Total length | 181 mm |
| Ø Pedal wedge | 9.5 mm |
| Cranking (offset) | 52 mm |
| Ø Pedal axle | 16 mm |
| Universal |
| Puch |
Accessories & related products
Hot 
Union Plastic Pedals "Original"
Manufacturer: Union · Material: Plastic · Material: Steel · Color: black · Surface: rubberized · Width: 77 mm · Height: 29 mm · Drive: Hexagon socket · Drive: Outer edge · Total length: 129 mm · Width across flats: 15 mm · Reflectors: Yes · Thread type: FG14.3 (9/16" 20G)
15,20 EUR
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,80 EUR
2 580,00 EUR/l
Explore categories from Treadmill
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Height: 5.3 mm · Width: 105 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs · Color: silver · Ø mounting hole: 5 mm
12,80 EUR
Not so nice 
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
23,40 EUR
Magura set screw M6 x 34 lock nut SW8
Slotted: No · Manufacturer: Magura · Thread length: 24 mm · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø cable holder: 3.05 mm · Thread type: M6x1 (standard thread) · Ø Receptacle: 7.05 mm · Total length: 34 mm
2,95 EUR
Working late? Evening hours on Thursday until 20:00
