High-quality M11x180 thru axle made of galvanized steel for the front wheel on various Monark mopeds/mopeds.
The front axle with M11x1 mm thread is made of extremely durable special steel.
The ends are chamfered and the thread is perfectly cut. This makes it easy to fit the cones and wheel nuts.
Matching axle nuts can be found in the accessories section.
Nostalgic product for the highest standards from the swiing® quality brand.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Ø shaft | 10.95 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Thread length | 75 mm |
| Shank length | 30 mm |
| Total length | 180 mm |
| Monark |
Accessories & related products
Nut M11x1 x 10 SW19 Wheel nut galvanized
Strength class: 8 · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 1D · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Width across flats: 19 mm · Nominal diameter (thread): 11 mm · Height: 10 mm
2,95 EUR
swiing® revival nut M11x1 x 10 SW17 wheel nut Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Nut type: Hexagon nut 1D · Height: 10 mm · Width across flats: 17 mm · Thread type: MF11x1 (fine pitch thread)
7,55 EUR
swiing® revival wheel nut M11x1 x 4 SW17 Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Nut type: Hexagon flat nut · Height: 4 mm · Width across flats: 17 mm · Thread type: MF11x1 (fine pitch thread)
6,95 EUR
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Height: 12 mm · Ø outside: 19 mm · Width across flats: 15 mm · Color: graphite colors · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Thread type: MF11x1 (fine pitch thread)
9,30 EUR
swiing® revival nut M11x1 x 4 SW17 wheel nut galvanized
Manufacturer: swiing® revival parts · Material: Steel · Nominal diameter (thread): 11 mm · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Hexagon nut · Height: 4 mm · Width across flats: 17 mm · Thread type: MF11x1 (fine pitch thread) · Strength class: 8
3,40 EUR
Explore categories from Hub & axle
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Nipple length: 10 mm · Number of components: 1 pcs
2,80 EUR
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Bearing cage: Sheet steel cage ball-guided · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Area of application: Standard · Material: Steel · Ø inside: 25 mm · Ø outside: 36 mm · Width: 6.8 mm
9,30 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
12,80 EUR
28,44 EUR/l
Nut M11x1 x 10 SW19 Wheel nut galvanized
Strength class: 8 · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 1D · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Width across flats: 19 mm · Nominal diameter (thread): 11 mm · Height: 10 mm
2,95 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
