
Choke lever for attachment to the left brake lever on your moped, moped or small motorcycle.
The decompression lever with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Color | white |
| Place of use | left |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Thread length: 4 mm · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Number of components: 2 pcs
2,35 EUR
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Housing material: Steel · Surface: burnished · Material lever: Plastic · Color: black · Total length: 94 mm · Thread type: M5x0.8 (standard thread) · Ø inside: 22 mm · Mounting type: Screws · Number of fixing points: 2 pcs
58,70 EUR
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø nipple: 3.3 mm · Ø nipple: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 1800 mm · Nipple length: 7 mm · Pony OEM number: P0919
2,80 EUR
swiing® revival decorative lever slotted mount left black (Magura)
Manufacturer: swiing® revival parts · Color: black · Material: Plastic · Material: Sheet metal (steel) · Surface: galvanized (blue) · Surface: raw · Height: 19.6 mm · Total length: 50 mm · Place of use: left · Thickness: 1.2 mm
29,30 EUR
Explore categories from Handles & fittings
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Thread length: 4 mm · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Number of components: 2 pcs
2,35 EUR
Speedometer 60 km/h Ø 48 mm black / chrome
Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Color: red · Color: white · Maximum speed: 60 Km/h · Lighting: Light slit · Signal type Tacho: analog · 4-edge speedometer cable: 1.8 mm · Ø Receptacle: 48 mm · Thread type: MF10x1 (fine pitch thread) · Ø outside: 50.4 mm · Total height: 70 mm · Depth: 50 mm
70,50 EUR
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø nipple: 3.3 mm · Ø nipple: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 1800 mm · Nipple length: 7 mm · Pony OEM number: P0919
2,80 EUR
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Color: sand-colored · Thickness: 0.4 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Number of fixing points: 16 pcs · Material: Sealing paper · Total length: 250 mm · Width: 170 mm · Ø inside: 86 mm · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
6,95 EUR









