Short version of the bolt for holding the support plate (brake anchor plate) made of stainless steel for your Puch Maxi S, N, S-2A / Supermaxi LG1, LG2 mopeds
Including M10x1 nut and matching washer.
Total length: 32 mm
Ø bolt: 9.8 mm
Thread: M10
The M10x1 nut and a matching washer for the stud are included in the scope of delivery.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 349.1.41.008.1
| Drive | Outer edge |
| Manufacturer | swiing® revival parts |
| Number of components | 3 pcs |
| Material | Chrome steel (colloquially known as stainless steel) |
| Total length | 32 mm |
| Ø External head | 14 mm |
| Shank | Yes |
| Area of application | Standard |
| Ø shaft | 9.8 mm |
| Shank length | 9.5 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Thread length | 13 mm |
| Width across flats | 13 mm, 17 mm |
| Puch | E50 ZA50 (air-cooled) |
Ratings
Accessories & related products
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø outside: 91 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Total length: 187 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
82,60 EUR
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10 mm · Ø External brake pads: 80 mm · Total length: 135 mm · Ø bore: 12.2 mm · Ø outside: 92 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Cranking (offset): 10 mm · Brake lever length (lever length): 68 mm
88,50 EUR
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread) · Mounting type: Union nut
11,70 EUR
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Material: Steel · Outer width: 160 mm · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Distance mudguard - center hole: 300 mm · Number of fixing points: 4 pcs · Ø mounting hole: 12.5 mm · Total length: 305 mm · Wheel size: 17 "
17,60 EUR
Hot 
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm
11,70 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Mounting type: Union nut · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
11,70 EUR
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10 mm · Ø External brake pads: 80 mm · Total length: 135 mm · Ø bore: 12.2 mm · Ø outside: 92 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Cranking (offset): 10 mm · Brake lever length (lever length): 68 mm
88,50 EUR
Collection only possible with online purchase and appointment.
