Complete resonance exhaust system / reso exhaust for your Tomos Sprint, Quadro, Classic and Roadie moped / moped.
Optically an ordinary cigar exhaust, but a counter cone is incorporated inside.
This turns the supposedly original silencer into a resonance exhaust. For all those who want to combine original looks with tuning. The special exhaust has a pleasant volume even at higher engine speeds.
Tailpipe dimensions:
- Outer diameter: 70 mm
- Internal connection diameter: 28 mm
- Outer connection diameter: 30 mm
- Total length: 73 cm
All individual parts such as clamps, seal and flame tube, which are required for the installation of the exhaust, are included in the scope of delivery.
Note: For proper installation, the exhaust manifold may need to be shortened slightly and the silencer pushed completely forward. It is also advisable to drill out the holes on the flange to 6.5 mm. During installation, please check that all nuts and bolts are sufficiently tight and tighten them if necessary.
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 24.4 mm · Ø outside: 28 mm · Total length: 325 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Total length: 730 mm · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 130 mm · Hole spacing: 100 mm · Thickness: 4 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.3 mm, 20 mm
Material: Steel · Surface: galvanized (blue) · Ø inside: 29 - 31 mm · Width: 20 mm · Number of components: 1 pcs
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Nominal diameter: 70 mm · Clamping diameter: 66 - 70 mm · Width: 18 mm · Thickness: 2.5 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.5 mm
Material: Graphite / Graphite, Steel · Ø inside: 26.5 mm · Ø mounting hole: 6.5 mm · Thickness: 2.6 mm · Place of use: Outlet · Number of fixing points: 2 pcs · Hole spacing: 42 mm · Manufacturer: swiing® ingenious parts
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | chrome-plated |
| Ø outside | 70 mm |
| Color | Chrome |
| Mounting type | Screwed clamp |
| Flame tube attachment | Flange |
| Ø Internal connection | 28 mm |
| Exhaust type | Cigar |
| Total length | 730 mm |
| Tomos | Classic Quadro Sprint Roadie |
Ratings
Accessories & related products
Exhaust sidepipe 28 mm chrome | Tomos A3, A35
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Number of fixing points: 4 pcs · Ø outside: 60 mm · Mounting type: Nuts & bolts · Flame tube attachment: Stud bolts & nuts · Ø Internal connection: 24.5 mm · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Total length: 780 mm
153,50 EUR
Hot 
Exhaust sidepipe 28 mm black | Tomos A3, A35
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: black · Mounting type: Nuts & bolts · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 4 pcs · Total length: 780 mm · Ø Internal connection: 24.5 mm · Ø outside: 60 mm · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe
153,50 EUR
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs
2,35 EUR
swiing® revival float replica Bing SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Color: brown · Ø outside: 36.5 mm · Height: 18 mm
10,50 EUR
66HEROES Exhaust bracket 100 mm flat Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 130 mm · Thickness: 4 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Hole spacing: 100 mm
15,20 EUR
Not in stock
swiing® ingenious gasket outlet Ø 26.5 mm with steel ring graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Material: Steel · Ø inside: 26.5 mm · Thickness: 2.6 mm · Place of use: Outlet · Ø mounting hole: 6.5 mm · Hole spacing: 42 mm · Number of fixing points: 2 pcs
10,50 EUR
Collection only possible with online purchase and appointment.
