All wishlists Community wishlists
Carousel Image 1
logo_swiing ingenious parts

For: Piaggio

31412

swiing® ingenious lifting plate 0.5 - 3 mm | Piaggio Ciao, SI, Bravo, Boxer

rating iconrating iconrating iconrating iconrating icon
No reviews
23,40 EUR

Incl. 20% VAT.

Description

Aluminum stroke plate for your Piaggio Ciao, Si, Bravo, Boxer, Boss, Grillo and Gilera moped / moped.
The spacer is mounted under the cylinder base. The "lifting" of the cylinder increases the intake and exhaust timing. Accordingly, the same distance of the spacer should be turned down at the top of the cylinder
so that the original squish edge dimension and compression ratio are maintained.

Material thickness (selection): 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm
Material: aluminum
Ø cylinder neck: 46 mm
Number of attachment points: 3 pieces

Matching cylinders, sealant and alternative stroke plates in various thicknesses can be found in the accessories section.

Exclusive product for the highest demands of the quality brand swiing®.

Manufacturerswiing® ingenious parts
MaterialAluminum
Surfaceraw
Ø cylinder46 mm
Place of useCylinder base
Thickness0.5 mm, 1 mm, 1.5 mm, 2 mm, 3 mm
Area of applicationTuning
Piaggio

Ciao - P , SC , PX , C24

Si

Bravo / Super Bravo

Boxer

Grillo

Accessories & related products

Elring Curil T2 sealing compound 70 ml (polyurethane) non-hardening green
undefined

Universal

11517

Elring Curil T2 sealing compound 70 ml (polyurethane) non-hardening green

Temperature resistance (min.): -55 - 250 °C · Color: green · Manufacturer: Elring · Area of application: Chemistry · Contents: 70 ml · Gap dimension (max.): 0.2 mm

24,40 EUR

325,33 EUR/l

Athena 38.4 mm cylinder kit without head 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
undefined

For: Piaggio

19002

Athena 38.4 mm cylinder kit without head 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer

Nominal diameter: 38.4 mm · Manufacturer: Athena · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Number of fixing points: 3 pcs · Decompressor: Yes · Ø piston pin (B): 12 mm · Outlet type: clamped · Area of application: Tuning

188,20 EUR

Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
undefined

Universal

27782

Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C

Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Contents: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Area of application: Chemistry

26,90 EUR

Not in stock

384,29 EUR/l

swiing® ingenious lifting plate 0.5 - 3 mm | Piaggio Ciao, SI, Bravo, Boxer
undefined
angle-right

For: Piaggio

31407

swiing® ingenious lift plate 3 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Ø cylinder: 46 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Area of application: Tuning

23,40 EUR

swiing® ingenious lifting plate 0.5 - 3 mm | Piaggio Ciao, SI, Bravo, Boxer
undefined
angle-right

For: Piaggio

31407

swiing® ingenious lift plate 2 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Ø cylinder: 46 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Area of application: Tuning

23,40 EUR

swiing® ingenious lifting plate 0.5 - 3 mm | Piaggio Ciao, SI, Bravo, Boxer
undefined
angle-right

For: Piaggio

31407

swiing® ingenious lifting plate 1.5 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Ø cylinder: 46 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Area of application: Tuning

23,40 EUR

swiing® ingenious lifting plate 0.5 - 3 mm | Piaggio Ciao, SI, Bravo, Boxer
undefined
angle-right

For: Piaggio

31407

swiing® ingenious lifting plate 1 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Ø cylinder: 46 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Area of application: Tuning

23,40 EUR

swiing® ingenious lifting plate 0.5 - 3 mm | Piaggio Ciao, SI, Bravo, Boxer
undefined
angle-right

For: Piaggio

31407

swiing® ingenious lift plate 0.5 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Ø cylinder: 46 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Area of application: Tuning

23,40 EUR

Explore categories from Cylinder

S-10-60-030_Zylinder_Rennsatz
Cylinder & racing set
S-10-60-040_Zylinderkopf
Cylinder head
S-10-60-020_Kolben
Piston
S-10-60-010_Dichtungen
Seals
S-10-60-050_Zubehoer_Dekompressor
Decompressor & tools & accessories

Moped fans also bought

EFFE breaker without cable | Piaggio Ciao, SI, Bravo, Boxer
undefined

For: Piaggio

16343

EFFE breaker without cable | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: EFFE · Area of application: Original · Area of application: Standard · Material: Steel · Ø mounting hole: 4.5 mm · Cable available: No · Ø axle: 5 mm · Number of fixing points: 1 pcs · Piaggio OEM number: 103133

13,50 EUR

Spring washer flywheel | Piaggio Ciao, SI, Bravo, Boxer
undefined

For: Piaggio

18299

Spring washer flywheel | Piaggio Ciao, SI, Bravo, Boxer

Spring design: Special spring · Surface: blank · Manufacturer: Made in Italy · Ø inside: 14.7 mm · Ø outside: 20.5 mm · Area of application: Standard · Material: Spring steel · Material thickness: 0.2 mm

3,40 EUR

Cover plate cylinder cover black | Piaggio, Ciao, SI, Bravo, Boxer
undefined

For: Piaggio

18855

Cover plate cylinder cover black | Piaggio, Ciao, SI, Bravo, Boxer

Total length: 95 mm · Width: 63 mm · Height: 90 mm · Manufacturer: Made in Italy · Material: Plastic · Surface: blank · Color: black · Number of fixing points: 2 pcs

15,20 EUR

Wedge 12.1x4.9x3 mm

Universal

18948

Wedge 12.1x4.9x3 mm

Total length: 12.5 mm · Width: 3 mm · Height: 4.9 mm · Material: Steel

2,25 EUR

CIF gasket set engine / gearbox with shaft seals Vario | Piaggio Ciao, SI, Bravo, Boxer
undefined

For: Piaggio

19434

CIF gasket set engine / gearbox with shaft seals Vario | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: CIF · Gearbox type: Vario · Place of use: Gear hub · Area of application: Standard · Piaggio OEM number: 008766 · Piaggio OEM number: 008771 · Piaggio OEM number: 112967 · Piaggio OEM number: 131511 · Piaggio OEM number: 182519 · Piaggio OEM number: 240222 · Piaggio OEM number: 480464 · Piaggio OEM number: 482552

26,90 EUR

GPO 40 mm gasket cylinder head 0.4 mm aluminum | Piaggio Ciao, SI, Bravo Boxer
undefined

19779

GPO 40 mm gasket cylinder head 0.4 mm aluminum | Piaggio Ciao, SI, Bravo Boxer

Manufacturer: GPO · Material: Aluminum · Place of use: Cylinder head · Ø cylinder: 38 - 40 mm · Thickness: 0.4 mm

2,80 EUR

swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer

For: Piaggio

20451

swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer

Ø mounting hole: 4.4 mm · Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Mounting type: Tab for screwing · Height: 26 mm · Connection type: Cable for screwing · Ø outside: 18 mm · Total height: 31 mm · Area of application: Original · Area of application: Standard · Piaggio OEM number: 102939

14,00 EUR

Not in stock

Oil seal FPM 15/24/5 AS

Universal

26975

Oil seal FPM 15/24/5 AS

Temperature resistance (min.): -30 - 200 °C · Surface: rubberized · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Width: 5 mm · Ø inside: 15 mm · Ø outside: 24 mm · Material: FPM / FKM (colloquially known as Viton)

10,70 EUR

Oil seal FPM 15/24/5 AS crankshaft original | Piaggio Ciao, SI, Bravo & Boxer
undefined

For: Piaggio

28481

Oil seal FPM 15/24/5 AS crankshaft original | Piaggio Ciao, SI, Bravo & Boxer

Place of use: Crankshaft · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm · Manufacturer: Piaggio · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized

10,70 EUR

swiing® revival 0.5 mm cylinder base gasket | Piaggio Ciao, SI, Bravo, Boxer

For: Piaggio

33753

swiing® revival 0.5 mm cylinder base gasket | Piaggio Ciao, SI, Bravo, Boxer

Place of use: Cylinder base · Thickness: 0.5 mm · Manufacturer: swiing® revival parts · Ø inside: 46 mm · Material: Oiled paper · Ø cylinder: 38 - 43 mm · Piaggio OEM number: 182519

5,75 EUR