Very useful tool for fixing the flywheel.
The flywheel stopper can be used on all Bosch and Ducati flywheels, as well as those with the same masses.
Stable construction made of galvanized steel. Comfortable rubber grip.
Ø outer plate: 93 mm
Ø inner plate: 51 mm
Pin spacing: 68 mm
Ø pins: 8 mm
Pin length to heel: 5.5 mm
Figure 3 shows the application of the tool.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue), rubberized |
| Diameter | 19 mm |
| Total length | 290 mm |
| Thickness | 5 mm |
| Height | 80 mm |
| Ø inside | 27 mm |
| Ø outside | 93 mm |
| Number of components | 1 pcs |
| Ø Pin | 8 mm |
| Area of application | Special tool |
| Universal | |
| Puch | |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Ratings
Accessories & related products
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Thread type: MF27x1 LH (fine/left-hand thread) · Weight: 337 g
112,70 EUR
Bosch flywheel clockwise NOS | Puch E50
Manufacturer: BOSCH · Material: Steel · Thread type: MF26x1.5 (fine pitch thread) · Direction of rotation: right · Ø cone small inside: 11.9 mm · Ø cone large inside: 15 mm · Ø Flywheel outside: 115.8 mm · Cone length: 17.8 mm · Ø Internal flywheel: 91.2 mm · Cone ratio: 1:5 · Height: 36.6 mm · Thread length: 6.5 mm · Weight: 900 g
252,50 EUR
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Width across flats Screw: 19 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Strength class: 8.8
11,60 EUR
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Total length: 120 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Diameter: 24 mm · Diameter: 40.3 mm · Number of components: 1 pcs · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Area of application: (Dis)assembly tool
51,60 EUR
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Material: Steel · Surface: blackened · Total length: 57 mm · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
23,40 EUR
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Number of components: 4 pcs · Thread type: M6x1 (standard thread) · Height: 16 mm · Ø outside: 75 mm · Ø inside: 64 mm · Thread length: 40 mm · Area of application: Special tool · Sachs OEM no.: 0276 057 000
35,10 EUR
Not in stock
GPO piston pin extractor Ø 10, 12, 14 mm
Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Manufacturer: GPO · Total length: 130 mm · Material: Steel · Number of components: 7 pcs · Width across flats: 10 mm · Width across flats: 17 mm · Area of application: (Dis)assembly tool
23,40 EUR
Collection only possible with online purchase and appointment.
