Hot 
First-class racing kit with 50 cc displacement, suitable for your Puch Maxi S / N, X30 Sport NS / NL, X30 Sport NG-2A or Supermaxi moped, moped.
The 38 mm tuning cylinder has a large intake and exhaust as well as optimized timing. In combination with a 15 mm carburettor, this allows significantly more power to be achieved than with the original cylinder.
Compared to other products on the market, the sealing surface in the exhaust area has been enlarged and refreshed. This also makes it possible to fit a 28 mm exhaust manifold, which significantly increases performance even further.
Otherwise, the racing cylinder is virtually indistinguishable from the original. The cast-in «CH12» and the original-style cooling fins ensure an unobtrusive appearance and provide reliable protection from prying eyes, especially from the race organizers.
In addition to the cylinder, the scope of delivery also includes the complete piston kit, all gaskets, the stud bolts and detailed assembly instructions. If you would like to have the complete set, select this in the selection field to also receive the matching cylinder head.
Note:
This racing kit should be run with at least a 22 mm exhaust (2-bend) or 22 mm manifold so that the exhaust gases can also be removed and no heat build-up occurs. Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
Hole pattern [mm]: 44 x 44 · Inlet window: 23.4 x 14.7 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Hot
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Total length: 910 mm · Ø outside: 59 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø Silencer: 54.5 mm · Number of fixing points: 4 pcs · Color: Chrome · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Flame tube attachment: Flange
158,70 EUR
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Area of application: Tuning · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Camouflaged: Yes · Width: 50 mm · Mixed oil connection: No · Height: 95 mm · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
94,00 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Area of application: Tuning · Hole spacing inlet: 38 mm · Total length: 46 mm · Total height: 53 mm · Camouflaged: Yes · Height flange center hole: 43 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
41,10 EUR
Hot
swiing® ingenious 38 mm cylinder kit (CH12 Vertex-Edition) Tuning camouflaged | Puch
Nominal diameter: 38 mm · Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Inlet window: 24 / 21 x 15 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning · Alternative version of the Puch OEM number: 349.7.10.105.0
164,60 EUR
GPO 15 mm intake manifold | Puch ZA50
Total height: 63 mm · Manufacturer: GPO · Area of application: Tuning · Material: Aluminum · Mounting type: Screws · Number of fixing points: 2 pcs · Ø inside: 15 mm · Hole spacing inlet: 32 - 38 mm · Total length: 51.5 mm · Camouflaged: No · Height flange center hole: 52.5 mm · Ø External connection: 20 mm
46,50 EUR
swiing® ingenious 44 mm cylinder kit CH12 camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 44 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 21 x 14 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: Yes · Hole spacing inlet: 38 mm
141,10 EUR
swiing® ingenious 45 mm cylinder kit CH12 camouflaged | Puch
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Inlet window: 23 / 21 x 14 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Number of fixing points: 4 pcs · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing inlet: 38 mm
141,10 EUR
swiing® ingenious 4 mm intake gasket 15 mm intake manifold square | Puch E50, Z50, ZA50
Nominal diameter: 15 mm · Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (colloquially known as Bakelite) · Place of use: Admission · Thickness: 4 mm · Hole spacing inlet: 38 mm · Ø screw holder: 6.2 mm
8,85 EUR
Explore categories from Cylinder
Moped fans also bought
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Standard · Total length: 135 mm · Height: 55 mm · Ø cylinder: 38 mm · Candle thread: short · Decompressor: No · Width: 125 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44
38,70 EUR
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Diameter: 5.9 mm · Width across flats: 10 mm · Total length: 106 mm · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,70 EUR
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Area of application: Tuning · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Camouflaged: Yes · Width: 50 mm · Mixed oil connection: No · Height: 95 mm · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
94,00 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Area of application: Tuning · Hole spacing inlet: 38 mm · Total length: 46 mm · Total height: 53 mm · Camouflaged: Yes · Height flange center hole: 43 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
41,10 EUR
swiing® ingenious 15 mm carburetor set camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
123,40 EUR
Working late? Evening hours on Thursday until 20:00
