Black, adjustable shock absorbers with pink coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
| Surface | varnished |
| Color | pink, black |
| Damping type | Spring |
| Ø outside | 50 mm |
| Adjustable | Yes |
| Ø Fastening inside | 10 mm |
| Ø spars | 30 mm |
| Hole spacing | 300 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,70 EUR
2 570,00 EUR/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Color: black · Ø outside: 52 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Hole spacing: 330 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
164,00 EUR
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Ø outside: 46 mm · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Hole spacing: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
58,50 EUR
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Thread type: M5x0.8 (standard thread) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Width: 105 mm
12,80 EUR
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
10,30 EUR
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Total length: 66 mm · Height: 95 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Tuning · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Width: 50 mm
76,10 EUR
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Total length: 47 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Total height: 54 mm · Number of fixing points: 2 pcs · Ø inside: 14.5 mm · Ø External connection: 20 mm · Height flange center hole: 43 mm · Area of application: Tuning · Camouflaged: Yes
13,90 EUR
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Number of teeth: 10 pcs · Color: black · Color: silver · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
11,60 EUR
Collection only possible with online purchase and appointment.
