Piston kit with a rectangular piston ring with internal circlip (IS) and a rectangular piston ring with flank circlip (FS) for your Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds without catalytic converter.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their positions and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer Meteor.
Details
| Manufacturer | Meteor |
| Ø outside piston (A) | 38.2 mm, 38.4 mm, 38.6 mm, 38.8 mm |
| Compression height (C) | 26.6 mm |
| Curvature (D) | 3.3 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 38.2 mm, 38.4 mm, 38.6 mm, 38.8 mm |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS), Internal fuse (IS) |
| Ø piston pin (B) | 10 mm |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Number of components: 7 pcs · Manufacturer: GPO · Material: Steel · Surface: burnished · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
21,00 EUR
23,40 EUR
Moped fans like you also bought:
Headlight black | Piaggio Ciao PX, C24
Width: 125 mm · Manufacturer: Made in Italy · Test mark: none · Tension: 6 V · Tension: 12 V · Color: black · Area of application: Original · Housing material: Plastic · Area of application: Standard · Lens material: Plastic · Bulb holder: P26s · Number of fixing points: 2 pcs · Depth: 147 mm · Ø External connection: 6.3 mm · Speedometer recording: 48 mm · Switch included: Yes · Height: 90 mm · Battery operated: No · Mounting type: Screws · Piaggio OEM number: 584240
44,50 EUR
Tail light black | Piaggio Ciao PX, C24, Bravo
Width: 130 mm · Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Color: black · Color: red · Bulb holder: BA9s · Number of fixing points: 2 pcs · Depth: 43 mm · Height: 58 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts
22,20 EUR
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 10 mm · Width across flats (trigger): 17 mm · Number of components: 2 pcs · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Area of application: (Dis)assembly tool · Diameter: 12 mm · Diameter: 24 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Total length: 100 mm
21,00 EUR
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Width: 9 mm · Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Ø inside: 11.25 mm · Ø inside: 15 mm · Total length: 53.5 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Ball bearing closed: Yes
34,60 EUR
Collection only possible with online purchase and appointment.
