A unique racing exhaust with an integrated muffler for your moped, scooter, and small motorcycle.
The exhaust is shipped without a header; this can be custom-made and welded on, and the mounting bracket is also included separately.
This tuning exhaust is characterized by its very high-quality craftsmanship and is sometimes described as one of the most powerful racing mufflers for Puch racing mopeds with small displacement.
The length of the resonator is ideal for cylinder kits between 42 and 45 mm.
This tuning muffler features visible weld seams for a distinctive look. The surface is raw and untreated. To prevent corrosion, the tuning muffler should be rubbed with oil from time to time or coated with heat-resistant paint.
Ø for flame tube: 28 mm
Total length: 830 mm
Material: Steel, raw
Handcrafted HOMOET DEMPER exhaust system from the Netherlands.
| Manufacturer | HOMOET |
| Material | Steel |
| Surface | raw |
| Mounting type | Weld |
| Ø Flame tube outside | 28 mm |
| Total length | 830 mm |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Weld |
Accessories & related products
Exhaust manifold 22 mm | Sachs 503 AB (with guide bushing)
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø inside: 20 mm · Ø outside: 22 mm · Ø inside: 26 mm · Ø outside: 28 mm · Color: Chrome · Number of fixing points: 2 pcs · Total length: 440 mm · Hole spacing outlet: 50 mm · Flame tube attachment: Stud bolts & nuts
35,20 EUR
swiing® ingenious exhaust manifold 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 25 mm · Ø outside: 28 mm · Color: Chrome · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Total length: 380 mm · Hole spacing outlet: 42 mm
46,90 EUR
Hot 
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Place of use: Exhaust · Material: Graphite / Graphite · Ø inside: 27.4 mm · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
8,70 EUR
Explore categories from Exhaust system
Moped fans also bought
Polini CP 19 mm carburetor (hand choke)
Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: CP · Nominal diameter: 19 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Nozzle size: 66 · Size of secondary nozzle: 42 · Mounting type: Plug connection clamped · Total length: 73.5 mm · Width: 66 mm · Height: 135 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
164,60 EUR
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Drive: External hexagon · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
46,90 EUR
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Height: 29 mm · Width: 58 mm · Mounting type: Screwed clamp · Number of fixing points: 1 pcs · Total length: 110 mm · Thread type: M5x0.8 (standard thread) · Thread length: 10 mm
29,30 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
