Non-spark plug connector made of hard plastic for your moped, moped and small motorcycle.
The spark plug lead is pushed into the guide. The pointed spike, which is made of brass, is screwed into the spark plug hole and thus secures the ignition cable and establishes contact.
Since the ignition plug has an M4 mounting thread, the end cap on the ignition plug must be removed.
Cables with a maximum diameter of 7 mm can be used.
When using an electronic ignition system (HPI, PVL, Selettra, etc.), a de-stemmed spark plug cap should be used.
Matching spark plugs, spark plug cables and alternative spark plug plugs can be found in the accessories section.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Material | Plastic |
| Color | black |
| Spark plug socket | M4 |
| Cable available | No |
| Suppressed | No |
| Ø cable | 5 mm, 7 mm |
| Subcategory | Spark plug connector |
Ratings
Accessories & related products
- 10 %
Hot 
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
10,10 EUR
9,05 EUR
Moped fans also bought
- 12 %
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø nipple: 3 mm · Nipple length: 5 mm · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs
2,75 EUR
2,40 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
11,30 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Material: Sealing paper · Surface: blank · Manufacturer: swiing® revival parts · Component group Carburetor: Sealing, revising · Ø outside: 45 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
3,20 EUR
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Ø outside: 20 mm · Total length: 23.4 mm · Total length: 50 mm · demountable: No · Filter type: Plastic net · Ø inside: 3 mm · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm · Color: transparent · Color: white
6,65 EUR
5,60 EUR
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Stock number: E15 · Area of application: Standard · Bearing type: Shoulder bearing · Ø outside: 35 mm · Ø inside: 15 mm · Width: 8 mm · Ball bearing closed: No · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
28,50 EUR
Collection only possible with online purchase and appointment.
