Complete CDI ignition for left-turning engines. Ignition is with light and has an operating voltage of 6V and 12 amps.
Connection of the supplied 6/12V voltage regulator:
- Pin 1: Yellow, current-carrying cable from the light coil
- Pin 2: Yellow cable to light
- Pin 3: Ground
The blue cable from the ignition switch (black part on the base plate) goes directly to the ignition coil. Because the ignition is contactless, the ignition can of course only be adjusted with a strobe light and a mark for the desired ignition time must first be attached to the magnetic flywheel and motor housing. The light coil is at the bottom, the switchgear at the top.
The strobe lamp and other useful items can be found under accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Manufacturer: GPO · Material: Steel · Tension: 6 V, 12 V · Direction of rotation: left · Cone ratio: 1:5 · Ø Internal flywheel: 90.9 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Weight: 900 g
Manufacturer: CEAB · Material: Plastic · Tension: 6 V · Type of current: Alternating current (AC) · Mounting type: Screws · Ø mounting hole: 6 mm
Manufacturer: GPO · Material: Aluminum, Copper, Plastic, Steel · Tension: 6 V, 12 V · Number of cables: 2 pcs · Cable length: 580 mm · Ø inside: 18.5 mm · Ø Internal flywheel: 90 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Area of application: Standard, Performance
Manufacturer: GPO · Color: black · Ø cable holder: 7 mm · Total length: 560 mm · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Area of application: Standard
| Manufacturer | GPO |
| Tension | 6 V |
| Direction of rotation | left |
| Number of fixing points | 4 pcs |
| Ø mounting plate | 90 mm |
| Area of application | Standard, Performance |
| Ø Internal flywheel | 90 mm |
| Mounting type | Screws |
| Puch | ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo |
Accessories & related products
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5 mm · Cable length: 140 mm · Cable length: 420 mm · Color: black · Total length: 77 mm · Height: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Area of application: Original · Area of application: Performance · Area of application: Standard
117,10 EUR
Not in stock
GPO ignition set CDI anticlockwise 12 V
Manufacturer: GPO · Material: Aluminum · Tension: 12 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
246,10 EUR
Moped fans also bought
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Diameter: 4.9 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Area of application: Standard · Total length: 23 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
2,10 EUR
GPO ignition plate 6 / 12V CDI ignition
Manufacturer: GPO · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Tension: 6 V · Tension: 12 V · Ø Internal flywheel: 90 mm · Ø inside: 18.5 mm · Cable length: 580 mm · Ø outside: 90 mm · Number of cables: 2 pcs · Ø bolt circle: 80 mm · Number of fixing points: 4 pcs · Area of application: Performance · Area of application: Standard
105,40 EUR
swiing® revival pinion shaft | Sachs 50/2 manual (A1291)
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Number of teeth: 4 pcs · Toothing type: straight toothed · Recording type: Ø15 x SW12 · Ø inside: 13 mm · Ø outside: 15.4 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 102.6 mm · Pony OEM number: A1291 · Sachs OEM no.: 0237 014 002
90,10 EUR
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Ø piston pin (B): 12 mm · Piston weight: 86 g
46,80 EUR
Collection only possible with online purchase and appointment.
