Transparent float chamber compatible with Bing SRE, SRC, SRF, and SRA 1/11/35 carburetors. This float chamber was installed on Puch Maxi, X30, Velux, Sachs, and Zündapp Belmondo mopeds, among others.
Thanks to the transparent material, you can always keep an eye on the fuel mixture, immediately see the float level, and check for any deposits forming in the chamber.
The float cover can be permanently installed. When tightening it, make sure to tighten it only slightly by hand, just as with the original cap.
Outer diameter: 44 mm
Total height: 31 mm
Wrench size (SW): 19 mm
You can find the original float cap as well as various maintenance products for your carburetor in the accessories section.
| Material | Plastic |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | SRA (1/11/35) Velux, SRA (1/11/31) Velux, SRE, SRC, SRF |
| Width across flats | 19 mm |
| Ø outside | 44 mm |
| Height | 31 mm |
| Number of fixing points | 1 pcs |
| Puch | |
| Sachs | 503 - AAL , ABL , 2AL / 2BL , AB , AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
BING Float cap Bing Original SRE, SRC, SRF, SRA
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 43.5 mm · Height: 32.5 mm · Width across flats: 14 mm · Piaggio OEM number: A4587 · Sachs OEM no.: 0962 056 000
22,20 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
3,30 EUR
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 82 · Clamping screw torque (max.): 4 N/m · Width: 50 mm · Height: 95 mm · Area of application: Standard · Area of application: Tuning
156,40 EUR
Hot 
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Ø outside: 12.2 mm · Ø outside: 45 mm · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø inside: 7.8 mm · Ø inside: 41 mm
5,75 EUR
BING Carburetor cover Bing SRE (original)
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Carburetor type: SRE · Thread type: MF6x0.75 (fine pitch thread) · Pony OEM number: A4588 · Zündapp OEM number: 265-04.900 · Sachs OEM no.: 0962 058 005
18,70 EUR
BING Revision Set Float Bing SRE, SRC, SRF, SRA original
Manufacturer: BING · Component group Carburetor: Sealing, revising · Color: white · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Ø outside: 36.5 mm · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
35,20 EUR
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Cable length: 2200 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Area of application: Standard · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Surface: galvanized (blue)
2,80 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
3,30 EUR
BING rubber grommet Ø 8 mm carburetor pipe bend
Ø inside: 8 mm · Ø outside: 12 mm · Manufacturer: BING · Material: Rubber · Clamping diameter: 4 mm · Total length: 29 mm · Color: black · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
4,60 EUR
Hot
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Ø outside: 12.2 mm · Ø outside: 45 mm · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø inside: 7.8 mm · Ø inside: 41 mm
5,75 EUR
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Total length: 66 mm · Ø fuel hose connection: 6 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
94,00 EUR
BING Revision Set Float Bing SRE, SRC, SRF, SRA original
Manufacturer: BING · Component group Carburetor: Sealing, revising · Color: white · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Ø outside: 36.5 mm · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
35,20 EUR
Working late? Evening hours on Thursday until 20:00
