Side exhaust tailpipe with a diameter of 65 mm suitable for various exhaust pipes on mopeds, mopeds or small motorcycles.
The tailpipe is perfectly modeled on the original. The end piece is flattened at the side.
This protects the rims and tires from dirt, as the exhaust gas flows off to the side, and also gives the muffler a nostalgic touch.
| Ø outside | 65 mm |
| Total length | 155 mm |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø External connection | 62.5 mm |
| Universal | |
| Puch | |
| Sachs | |
| Hercules |
Accessories & related products
Moped fans also bought
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Place of use: Crankshaft · Width: 7 mm · Ø outside: 33 mm · Ø inside: 17 mm · Temperature resistance (min.): -30 - 100 °C
10,50 EUR
NSK 6201 ball bearing 12/32/10
Bearing type: Shoulder bearing · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Width: 10 mm · Ø outside: 32 mm · Ø inside: 12 mm · Area of application: Standard
10,00 EUR
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Manufacturer: Sachs · Material: NBR · Surface: coated · Place of use: Pinion shaft · Width: 3.5 mm · Ø outside: 31.5 mm · Ø inside: 14.96 mm · Area of application: Standard · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
8,85 EUR
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 15 mm · Ø outside: 30 mm · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
6,35 EUR
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Height: 35 mm · Total length: 41.5 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Thread type: MF6x0.75 (fine pitch thread)
8,10 EUR
Handlebar stem 22 mm front black (4-point adjustment for fork plate handlebars)
Material: Aluminum · Material: Steel · Surface: powder-coated · Color: black · Width: 50 mm · Ø Stem: 22 mm · Total length: 170 mm · Clamping diameter: 22 mm · Drive: External hexagon · Number of fixing points: 4 pcs
35,20 EUR
Collection only possible with online purchase and appointment.
