Chrome-plated 28 mm cigar exhaust with 70 mm outer diameter, which can be fitted to your Puch Maxi S/N, Puch X30 Sport NS/NL and Puch X30 NG-2A moped after a small adjustment.
Flame pipe and silencer are separate and are supplied without clamp as shown.
Notes: A 70 mm clamp (item no. 11543 or 18313) must be used to fit the Puch Maxi N.
For Puch X30 NG-2A, the spanner must be bent slightly so that it does not protrude from the rear case.
The M6 screw at the end of the pot must be checked and locked with an additional nut, otherwise the nut may loosen and the silencer insert may fall out.
A quality product made in Portugal.
| Manufacturer | Made in Portugal |
| Surface | chrome-plated |
| Color | Chrome |
| Material | Steel |
| Total length | 920 mm |
| Number of fixing points | 1 pcs |
| Ø Internal connection | 28 mm |
| Ø outside | 70 mm |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cigar |
| Mounting type | Welded lug, Stud bolts & nuts |
| Flame tube attachment | Flange |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
- 14 %
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Ø inside: 27.4 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
8,70 EUR
7,40 EUR
Hot
swiing® ingenious Exhaust Clamp, 28 mm, Heat-Resistant, Chrome
Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 25 - 28 mm · Width: 40 mm · Mounting type: Nuts & bolts · Total length: 40 mm
25,80 EUR
Explore categories from Exhaust system
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Choke control: Hand choke · Height: 95 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Mounting type: Plug connection clamped · Total length: 66 mm · Area of application: Tuning · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
76,40 EUR
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Camouflaged: Yes · Material: Aluminum · Displacement: 65 ccm · Surface: sandblasted · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Decompressor: Yes · Ø piston pin (B): 12 mm · Outlet type: straight · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs
117,50 EUR
Hot
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 6 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Total length: 6 mm
18,70 EUR
Hot
GPO 44 mm Cylinder Head Tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Camouflaged: Yes · Material: Aluminum · Ø cylinder: 44 mm · Surface: sandblasted · Height: 55 mm · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44 · Width: 125 mm · Total length: 135 mm · Area of application: Tuning · Number of fixing points: 4 pcs
50,50 EUR
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Choke control: Hand choke · Height: 95 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Mounting type: Plug connection clamped · Total length: 66 mm · Area of application: Tuning · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
94,00 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Total height: 53 mm · Total length: 46 mm · Ø inside: 15 mm · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Ø External connection: 20 mm · Mounting type: Screws · Area of application: Tuning · Number of fixing points: 2 pcs · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
41,10 EUR
Working late? Evening hours on Thursday until 20:00
