1/2" x 3/16" chain, which has 128 links and is suitable for driving various mopeds, mopeds and small motorcycles. This roller chain has also been installed on bikes such as Puch, Puch Maxi, Sachs, Hercules, Pony, Tomos, Kreidler, Alpa, Zündapp, etc.
The chain lock with spring lock, also known as a clip lock, is included in the scope of delivery.
Pitch: 1/2x3/16 (415)
Finish: H (heavy-duty finish with reinforced links and enlarged joint surfaces)
Length: 128 links
Since the drive chain must be shortened in any case, we recommend that you also order a chain breaker, as listed under accessories.
Branded product from the manufacturer CYC.
| Chain type | 415H |
| Chain pitch | 1/2" x 3/16" |
| Surface | varnished |
| Color | red |
| Manufacturer | CYC |
| Material | Steel |
| Number of chain links | 128 pcs |
| Rolling circumference | 1626 mm |
| Chain lock type | Spring lock |
| Universal |
| Puch |
| Sachs |
| Pony / Cilo (Beta 521 & 512) |
| Zündapp Belmondo |
| Tomos |
| Bye Bike |
Ratings
Accessories & related products
Explore categories from Drive & transmission
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
11,70 EUR
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Surface: galvanized (blue) · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Area of application: Standard
2,80 EUR
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread) · Mounting type: Union nut
11,70 EUR
Not in stock
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Surface: nickel-plated · Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Drive: Slot · Total length: 6 mm · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
2,35 EUR
GPO sprocket 45 teeth chrome | Puch Maxi, X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 94 mm · Manufacturer: GPO · Material: Steel · Color: silver · Surface: chrome-plated · Number of teeth: 45 pcs · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Ø bolt circle: 106 mm · Cranking (offset): 8 mm
43,40 EUR
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Mounting type: Plug connection clamped · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Camouflaged: Yes · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Ø Output inside: 15 mm · Width: 50 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
94,00 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
