Specially welded, chrome-plated 32 mm flame pipe suitable for your Puch Maxi moped / moped with E50 engine or X30 NS, NL with 2-speed Z50 engine.
This exhaust bend allows the installation of a muffler with a Ø 32 mm mounting diameter and thus better exhaust gas removal from the engine.
The required fastening nuts are already included in the scope of delivery.
Note:
The accuracy of fit for Puch Maxi variants with E50 engines is good. On X30 Sport models with Z50 engines, there is a slight downward tilt, which varies slightly depending on the frame.
Depending on the setup, the exhaust pipe must be shortened accordingly to achieve optimum power delivery.
| Manufacturer | BAD ASS |
| Material | Steel |
| Color | Chrome |
| Surface | chrome-plated |
| Ø inside | 29.5 mm |
| Ø outside | 32 mm |
| Total length | 320 mm |
| Mounting type | Stud bolts & nuts |
| Hole spacing outlet | 42 mm |
| Number of fixing points | 2 pcs |
| Puch | E50 Z50 (X30 Sport) |
Ratings
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Ø inside: 27.4 mm · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
8,70 EUR
swiing® ingenious Drag Pipe 45° Chrome Ø 32 / 70 mm
Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 70 mm · Total length: 670 mm · Ø Internal connection: 32 mm · Exhaust type: Dragpipe / sharp end · Mounting type: Screwed clamp
117,50 EUR
105,80 EUR
Hot 
swiing® ingenious cigar Ø 32 / 70 mm chrome (reso exhaust)
Total length: 730 mm · Ø outside: 70 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Ø Internal connection: 32 mm · Exhaust type: Cigar
117,50 EUR
Not in stock
Hot
swiing® ingenious flute Ø 32 / 70 mm chrome (reso exhaust)
Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø Internal connection: 32 mm · Ø Silencer: 70 mm · Flame tube attachment: Plug connection clamped · Ø outside: 35 mm · Exhaust type: Flute · Mounting type: Screwed clamp · Total length: 785 mm
129,30 EUR
swiing® ingenious exhaust clamp 32 mm heat-resistant
Total length: 40 mm · Width: 40 mm · Ø inside: 29 - 33 mm · Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Nuts & bolts
25,80 EUR
Explore categories from Exhaust system
Moped fans also bought
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Ø inside: 13.6 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 20.3 mm · Number of springs: 3 pcs · Area of application: Racing
364,70 EUR
Hot
swiing® ingenious cigar Ø 32 / 70 mm chrome (reso exhaust)
Total length: 730 mm · Ø outside: 70 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Ø Internal connection: 32 mm · Exhaust type: Cigar
117,50 EUR
Not in stock
NGK CR4 Racing ignition cable & plug High End red / 5 kΩ interference suppressed
Manufacturer: NGK · Material: Silicone · Color: red · Spark plug socket: SAE · Cable available: Yes · Suppressed: Yes · Cable length: 500 mm · Resistance: 5000 Ω · Subcategory: Ignition cable · Subcategory: Spark plug connector · Ø cable: 7 mm
38,70 EUR
swiing® ingenious exhaust clamp 32 mm heat-resistant
Total length: 40 mm · Width: 40 mm · Ø inside: 29 - 33 mm · Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Nuts & bolts
25,80 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
