All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
logo_badass

For: Sachs

37078

BAD ASS 43 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4

rating iconrating iconrating iconrating iconrating icon
No reviews
282,30 EUR

Incl. 20% VAT.

Description

Blade-cooled 43 mm (61 cc) cylinder kit with 12 mm piston pin, suitable for your Sachs 50, 502, 50/2, 50/3, 50/4 moped / moped.

The timing of the cylinder was kept rather low, which is characterized by a very nice torque in the lower speed range.
The racing cylinder kit without sealing includes cylinder & piston kit without gaskets.

  • Grey cast iron tuning cylinder with & 43.0 mm bore
  • Slot-controlled
  • 17x15 mm intake, 31 mm stud spacing
  • Optimized overflow channels
  • 2-piece outlet
  • Improved control times
  • No spindling of the engine housing necessary (Ø cylinder neck 46.0 mm)
  • Exhaust thread: M40 x 1.5 mm
  • Hole pattern for stud bolts: 60 x 40 mm for CH engines
  • Pre-drilled hole pattern for stud bolts: 51 x 40 mm for DE engines
  • Cylinder head hole pattern: 37 x 37 mm
  • Incl. Ø 43 mm piston from the Italian manufacturer -GOL-

Note: 60 mm long M6 stud bolts must be used to mount the cylinder. Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
Detailed assembly instructions are included.

Corresponding accessories such as gaskets, cylinder head, exhaust system etc. can be found in the accessories section.

Made by the BADASS brand.

Nominal diameter43 mm
ManufacturerBAD ASS
Area of applicationTuning
MaterialGray cast iron
Displacement61 ccm
Crankshaft stroke42 mm
Ø cylinder neck46 mm
Ø Outlet outside40 mm
Ø outlet inside28 mm
Inlet window17 x 15 mm
Number of fixing points4 pcs
Thread inletM5x0.8 (standard thread)
Hole spacing inlet31 mm
Ø piston pin (B)12 mm
Hole pattern [mm]60 x 40 / 51 x 40 / 37 x 37
Outlet typeUnion nut
Thread outletMF40x1.5 (fine pitch thread)
CamouflagedNo
Sachs

50 (Fahrtwind, 1.25 / 1.5 hp, DE)

502 (Saxonette) - AL , AML

50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS)

50/3

50/4 - MLFB (2.6 PS) , LKH (4.5 PS)

Accessories & related products

swiing® revival gasket cylinder base 0.3 mm | Sachs 50, 50/3, 50/4 DE engines

For: Sachs

12001

swiing® revival gasket cylinder base 0.3 mm | Sachs 50, 50/3, 50/4 DE engines

Manufacturer: swiing® revival parts · Material: Oiled paper · Place of use: Cylinder base · Thickness: 0.5 mm · Hole pattern [mm]: 40.5 x 51

4,10 EUR

- 16 %
swiing® revival stud bolt M5 x 23 inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)

For: Sachs

16088

swiing® revival stud bolt M5 x 23 inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)

Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Diameter: 4.9 mm · Thread type: M5x0.8 (standard thread) · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102

2,10 EUR

1,75 EUR

swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4

For: Sachs

18008

swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Color: silver · Total length: 34 mm · Drive: External hexagon · Screw head: Hexagon · Ø shaft: 5.85 mm · Width across flats: 10 mm · Area of application: Standard · Shank: Yes · Number of components: 12 pcs · Strength class: 10.9 · Shank length: 8 mm · Thread type: M6x1 (standard thread) · Thread length: 22 mm

5,75 EUR

swiing® ingenious reinforcement set clutch (+40%) | Sachs 503, 50/2 (502), 50/3, 50/4
undefined

For: Sachs

21002

swiing® ingenious reinforcement set clutch (+40%) | Sachs 503, 50/2 (502), 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Ø inside: 5.6 mm · Ø outside: 8.75 mm · Number of springs: 9 pcs · Thickness: 1.4 mm

41,10 EUR

Inlet gasket 2.6 mm Bing 17 mm | Sachs (50/2), 50/3, 50/4

For: Sachs

21571

Inlet gasket 2.6 mm Bing 17 mm | Sachs (50/2), 50/3, 50/4

Place of use: Admission · Thickness: 2.6 mm · Hole spacing inlet: 30 mm

6,95 EUR

swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
undefined

For: Sachs

27906

swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4

Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder head · Area of application: Standard · Ø cylinder: 41 mm · Ø inside: 41.7 mm · Thickness: 0.3 mm · Hole pattern [mm]: 37 x 37

5,75 EUR

swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
undefined

For: Sachs

28607

swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Ø outside: 98 mm · Height: 50 mm · Total length: 127 mm · Width: 95 mm · Number of fixing points: 4 pcs · Area of application: Standard · Ø screw holder: 19 mm · Candle thread: long · Decompressor: M10x1.5 · Hole pattern [mm]: 37 x 37

80,60 EUR

41 mm cylinder head tuning | Sachs 50/3, 50/4 LKH

For: Sachs

29270

41 mm cylinder head tuning | Sachs 50/3, 50/4 LKH

Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Ø outside: 128 mm · Camouflaged: Yes · Number of fixing points: 4 pcs · Area of application: Tuning · Candle thread: long · Decompressor: No · Hole pattern [mm]: 37 x 37

114,00 EUR

BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
undefined

For: Sachs

31318

BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Ø screw holder: 19.3 mm · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5

176,40 EUR

GPO stud bolt M6 x 62 mm
undefined

Universal

35591

GPO stud bolt M6 x 62 mm

Manufacturer: GPO · Material: Steel · Surface: blackened · Total length: 62 mm · Thread length: 7.8 mm · Thread length: 11.8 mm · Diameter: 5.3 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9

3,30 EUR

Explore categories from Cylinder

S-10-60-030_Zylinder_Rennsatz
Cylinder & racing set
S-10-60-040_Zylinderkopf
Cylinder head
S-10-60-020_Kolben
Piston
S-10-60-010_Dichtungen
Seals
S-10-60-050_Zubehoer_Dekompressor
Decompressor & tools & accessories

Moped fans also bought

GPO exhaust manifold 32 mm | Sachs 50/2, 50/3
undefined

For: Sachs

11699

GPO exhaust manifold 32 mm | Sachs 50/2, 50/3

Manufacturer: GPO · Mounting type: Union nut · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 29.6 mm · Ø outside: 32.2 mm · Total length: 255 mm · Ø External connection: 38 mm

32,80 EUR

swiing® revival gasket cylinder base 0.3 mm | Sachs 50, 50/3, 50/4 DE engines

For: Sachs

12001

swiing® revival gasket cylinder base 0.3 mm | Sachs 50, 50/3, 50/4 DE engines

Manufacturer: swiing® revival parts · Material: Oiled paper · Place of use: Cylinder base · Thickness: 0.5 mm · Hole pattern [mm]: 40.5 x 51

4,10 EUR

32 mm copper ring 30.6/37.8 flame tube | Sachs

For: Universal · Sachs

12136

32 mm copper ring 30.6/37.8 flame tube | Sachs

Material: Copper · Ø inside: 30.6 mm · Ø outside: 37.8 mm

5,75 EUR

swiing® revival exhaust nut M40x1.5 galvanized (for 32 mm pipe) | Sachs

For: Sachs

12140

swiing® revival exhaust nut M40x1.5 galvanized (for 32 mm pipe) | Sachs

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 33.5 mm · Nut type: Union nut · Ø outside: 46 mm · Height: 19 mm · Thread type: MF40x1.5 (fine pitch thread)

16,40 EUR

Inlet seal 17 mm spigot (5.5 mm) | Sachs 50/3

For: Sachs

12208

Inlet seal 17 mm spigot (5.5 mm) | Sachs 50/3

Place of use: Admission · Thickness: 5.5 mm · Hole spacing inlet: 30 mm

5,65 EUR

GPO exhaust clamp 34 mm chrome
undefined

Universal

15397

GPO exhaust clamp 34 mm chrome

Manufacturer: GPO · Mounting type: Nuts & bolts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 32 - 34 mm

10,50 EUR

Inlet gasket 2.6 mm Bing 17 mm | Sachs (50/2), 50/3, 50/4

For: Sachs

21571

Inlet gasket 2.6 mm Bing 17 mm | Sachs (50/2), 50/3, 50/4

Place of use: Admission · Thickness: 2.6 mm · Hole spacing inlet: 30 mm

6,95 EUR

swiing® revival carburetor 17 mm Bing SSB 1/17/69

For: Sachs

27370

swiing® revival carburetor 17 mm Bing SSB 1/17/69

Nominal diameter: 17 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Choke control: without choke · Width: 85 mm · Total length: 132 mm · Nozzle size: 76 · Height: 100 mm · Ø fuel hose connection: 6 mm · Hole spacing inlet: 31 mm · Mounting type: Flange · Mixed oil connection: No · Vacuum connection: No

149,30 EUR

BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
undefined

For: Sachs

31318

BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Ø screw holder: 19.3 mm · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5

176,40 EUR

GPO stud bolt M6 x 62 mm
undefined

Universal

35591

GPO stud bolt M6 x 62 mm

Manufacturer: GPO · Material: Steel · Surface: blackened · Total length: 62 mm · Thread length: 7.8 mm · Thread length: 11.8 mm · Diameter: 5.3 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9

3,30 EUR