41 mm tuning cylinder in the "Power Edition" version, made of aluminum with a displacement of 57 ccm, suitable for mopeds equipped with Sachs 503 2AL, AAL, 2BL, or ABL CH engines.
The racing kit, made of cast aluminum with a nickel-silicon carbide coating (commonly known as Nikasil), offers a significant performance boost across the entire RPM range, with an emphasis on low RPMs and high torque. Compared to the original cylinder, the sealing has been removed from this racing cylinder and the intake port has been enlarged. The overflow channels, as well as the exhaust and intake ports, have been modified to optimize valve timing. In addition, the exhaust port has been designed at a more aerodynamic angle. All housing covers can still be installed.
The package includes pistons, piston rings, clips, bolts, studs, and the necessary gaskets for the cylinder base, intake, and cylinder head.
Note: For Sachs 503 ABL engines, the engine block may need to be slightly ground down in the area of the cylinder neck. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find compatible cylinder heads and other versions in the accessories section.
Brand-name product from the manufacturer AKOA.
| Nominal diameter | 41 mm |
| Manufacturer | AKOA |
| Material | Aluminum |
| Surface | Nickel silicon carbide (colloquially known as Nikasil) |
| Displacement | 57 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 45.5 mm |
| Ø Outlet outside | 25.9 mm |
| Ø outlet inside | 20.5 mm |
| Ø Inlet inside | 15.8 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Hole spacing inlet | 32 mm |
| Ø piston pin (B) | 12 mm |
| Decompressor | No |
| Outlet type | clamped |
| Area of application | Tuning |
| Camouflaged | No |
| Sachs | 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
Hot 
swiing® ingenious 17 mm SRF carburetor camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Width: 47 mm · Carburetor type: SRE · Height: 89 mm · Height: 110 mm · Nominal diameter: 17 mm · Total length: 64.8 mm · Ø fuel hose connection: 5 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Area of application: Tuning · Clamping screw torque (max.): 3 N/m
141,10 EUR
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
211,70 EUR
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
258,80 EUR
Hot
swiing® ingenious intake manifold 17 mm short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Thread type: M6x1 (standard thread) · Ø External connection: 23 mm · Total length: 50 mm · Hole spacing inlet: 32 mm · Ø inside: 17 mm · Number of fixing points: 2 pcs · Area of application: Racing · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
58,70 EUR
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Thread type: M6x1 (standard thread) · Ø External connection: 20 mm · Total length: 50 mm · Hole spacing inlet: 32 mm · Ø inside: 15 mm · Number of fixing points: 2 pcs · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
58,70 EUR
swiing® ingenious decompressor set | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Copper · Material: Steel · Thread type: M10x1.5 (standard thread) · Thread length: 14 mm · Ø outside: 14 mm · Total length: 21.5 mm · Width across flats: 14 mm · Area of application: Standard · Sachs OEM no.: 0291 013 300
58,70 EUR
Not in stock
AKOA 38 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Surface: Nickel silicon carbide (colloquially known as Nikasil) · Manufacturer: AKOA · Material: Aluminum · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
211,70 EUR
AKOA 40 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Surface: Nickel silicon carbide (colloquially known as Nikasil) · Manufacturer: AKOA · Material: Aluminum · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 40 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
211,70 EUR
AKOA 43 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Surface: Nickel silicon carbide (colloquially known as Nikasil) · Manufacturer: AKOA · Material: Aluminum · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
270,50 EUR
Explore categories from Cylinder
Moped fans also bought
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Area of application: Standard · Material: Rubber · Surface: raw · Color: black · Place of use: Carburetor · Number of components: 1 pcs · Ø inside: 17.2 mm · Ø outside: 20 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
3,40 EUR
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing cage: Brass cage ball-guided · Material: Brass · Material: Steel · Bearing type: Shoulder bearing · Width: 10 mm · Ø outside: 40 mm · Ø inside: 15 mm · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
29,30 EUR
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
94,00 EUR
AKOA 41 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 41 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
247,00 EUR
Working late? Evening hours on Thursday until 20:00
