Product description

Air filter housing for your Puch MS50V, VS50, DS50, MV50, R50 and VZ50 small motorcycle.
The air filter screen is already installed in the housing.

Air intake connection dimensions:
Width: 22 mm
Length: 46 mm

You can find the matching intake rubber in the accessories section.

Product details

Total length	22 mm
Color	gray
Material	Plastic
Area of application	Standard
Width	46 mm
Mounting type	Plug connection
Puch OEM number	357.1.15.070.0

Suitable for the following models

Puch

Accessories & related products

For: DKW · Victoria

20885

Engine gasket set | M51/ MS50/ MS51

Area of application: Standard · Number of components: 7 pcs

32,70 EUR

Brake shoes Ø 105 x 25 | Puch MV, DS, VS, VZ

For: Puch

23143

Brake shoes Ø 105 x 25 | Puch MV, DS, VS, VZ

Ø drum: 105 mm · Springs included: Yes · Number of springs: 2 pcs · Width: 25 mm

27,60 EUR

For: DKW

24146

Surflex clutch plates | DKW / Puch MV

Manufacturer: Surflex · Ø inside: 55.5 mm · Ø inside: 72.7 mm · Ø inside: 74 mm · Ø outside: 98 mm · Ø outside: 99.4 mm · Ø outside: 104.2 mm · Number of slats: 3 pcs · Area of application: Original

56,20 EUR

Nos

Thrust washer 12.5/25/1.5 NOS | Puch M50, DSV, VZV

For: Puch

27867

Thrust washer 12.5/25/1.5 NOS | Puch M50, DSV, VZV

Material: Steel · Surface: hardened & ground · Ø inside: 12.5 mm · Ø outside: 25 mm · Thickness: 1.5 mm

11,50 EUR

Intake rubber (1A quality) | Puch MS, VS, MV, DS, X50 (small motorcycle)

For: Puch

29389

Intake rubber (1A quality) | Puch MS, VS, MV, DS, X50 (small motorcycle)

Manufacturer: Made in Italy · Material: Rubber · Color: black

17,00 EUR

Crankshaft full cheeks | Puch MV, VS, MS, DS, Monza, X50 (3 & 4 speed)

For: Puch

29593

Crankshaft full cheeks | Puch MV, VS, MS, DS, Monza, X50 (3 & 4 speed)

Cheek type: Full cheeks · Total length of crankpin on clutch side: 73 mm · Total length crankpin ignition side: 66 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Number of gears: 3 pcs · Number of gears: 4 pcs · Area of application: Tuning

169,90 EUR

Moped fans also bought

Universal

11179

Handlebar with stem 9 cm curved chrome

Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 22 mm · Ø Stem: 22 mm · Width: 630 mm · Stem height: 180 mm · Height: 90 mm · Mounting type: Front boom mounting · Length handlebar ends: 200 mm · Crossbar: No

79,60 EUR

Nos

Universal

17548

Denfeld saddle black NOS

Material thickness: 2 mm · Material thickness: 4 mm · Manufacturer: Denfeld · Total length: 280 mm · Material: Plastic · Material: Steel · Ø Saddle tube holder: 22 mm · Surface: galvanized (blue) · Width: 280 mm · Spring-loaded: Yes · Lettering: No · Height: 20 mm · Height: 120 mm · Color: black · Number of fixing points: 1 pcs

351,60 EUR

BING SSE carburetor 12 mm | Puch MV 50, MS 50

For: Puch

19737

BING SSE carburetor 12 mm | Puch MV 50, MS 50

Nominal diameter: 12 mm · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Mounting type: Flange · Hole spacing inlet: 32 mm · Area of application: Standard · Area of application: Tuning · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle size: 50

93,70 EUR

For: Puch

25966

Condor Puch sticker Ø 43 mm

Material: Polyvinyl chloride (PVC) · Diameter: 43 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank)

14,00 EUR

For: Puch

29389

Intake rubber (1A quality) | Puch MS, VS, MV, DS, X50 (small motorcycle)

Manufacturer: Made in Italy · Material: Rubber · Color: black

17,00 EUR

Collection only possible with online purchase and appointment.

Air filter | Puch MS, MV, DS, VS, VZ