Adjusting nozzle for the 9 mm carburetor of your Solex moped, moped or bicycle with auxiliary engine.
This so-called main jet can be used for any original Solex, for small engine modifications through to tuning units.
This multi-part nozzle with M6x1 thread is made of stainless steel and can be fitted to the carburetor without modification.
The adjusting screw allows you to continuously adjust the throttle sizes from 28 to 32 on the knurled knob in order to find the optimum running of the engine.
The internal O-ring prevents the adjusting screw from twisting and is made of petrol-resistant rubber. A second spare O-ring with a slightly larger diameter is included in the scope of delivery.
Note: Care should be taken during installation as it is more hollow and fragile than a conventional nozzle. It must be screwed on by hand and then lightly tightened with a wrench (just under 5°).
You can find more motor components in the accessories section.
| Material | Chrome steel (colloquially known as stainless steel) |
| Component group Carburetor | Spraying |
| Quantity | 1 pcs |
| Total length | 31 mm |
| Nozzle type | Main nozzle |
| Nozzle thread | M6x1 (standard thread) |
| Nozzle size | 28, 32 |
| Drive | External hexagon, Knurled screw |
| Width across flats | 12 mm |
| Solex |
Accessories & related products
Carburetor 9 mm camouflaged | Solex 3300, 3800, 5000
Manufacturer: Made in France · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Color: silver · Carburetor type: Gurtner DG · Nominal diameter: 9 mm · Nozzle thread: M6x1 (standard thread) · Nozzle size: 32 · Width: 80 mm · Total length: 133 mm · Ø fuel hose connection: 10.6 mm · Mixed oil connection: No · Mounting type: Screws · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning
188,20 EUR
Moped fans also bought
Magura adjusting screw brake long
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Color: silver · Total length: 47 mm · Total length: 65 mm · Drive: Knurled screw · Ø External head: 9.1 mm · Thread type: MF6x0.75 (fine pitch thread) · Thread length: 24 mm · Ø shaft: 6 mm · Shank length: 11 mm
4,60 EUR
Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Wheel size: 16 - 17 " · Wheel size: 17 " · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve
12,40 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
