Drive mechanism for the speedometer housing on the left side, compatible with your Zündapp ZL25, ZS25, ZX25, ZD10, ZD20, ZD25, ZD30, ZD40, ZD50, ZE40, ZR10, ZR20, ZR22, or ZR30 moped, as well as the CS50 moped with chassis numbers 446, 447, 448, 460 and engine types 250, 278, 280 with 17-inch wheels.
The speedometer drive, with a cast aluminum housing, is mounted on the left side of the front wheel and features two tabs for mounting and locking.
The diameter of the axle bore is 12 mm.
A threaded hole is machined into the housing for maintaining the speedometer drive or for applying grease to the speedometer worm gear. The appropriate grease nipple is included in the delivery and is already installed.
You can find compatible speedometer cables and the appropriate grease gun in the accessories section.
Original Zündapp part number: 446-16.600
| Material | Aluminum |
| Wheel size | 17 " |
| 4-edge speedometer cable | 1.8 mm |
| Ø outside | 47.5 mm |
| Ø mounting hole | 12.1 mm |
| Ø axle | 12 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Nominal diameter (thread) | 12 mm |
| Total height | 18.5 mm |
| Zündapp OEM number | 446-16.600 |
| Zündapp | ZR 10 / ZR 20 / ZR 22 / ZR 30 / ZB 22 (type 250-447) ZD 10 / ZD 30 (type 250-466) ZD 20 / ZD 25 / ZD 40 / ZD 50 (type 278-446) CS 25 / CS 25 Hai (Type 278-448) CS 50 / CS 50 Hai (type 280-448) ZA 25 / ZA 40 (type 250-460) ZL 25 / ZS 25 / ZX 25 / ZE 40 (type 278-460) |
Accessories & related products
VDO speedometer cable (38 - 100 cm) black (1A quality)
Manufacturer: VDO · Color: black · Outer shell length: 380 mm · Outer shell length: 450 mm · Outer shell length: 500 mm · Outer shell length: 550 mm · Outer shell length: 600 mm · Outer shell length: 650 mm · Outer shell length: 680 mm · Outer shell length: 700 mm · Outer shell length: 750 mm · Outer shell length: 800 mm · Outer shell length: 850 mm · Outer shell length: 900 mm · Outer shell length: 950 mm · Outer shell length: 1000 mm · 4-edge speedometer cable: 1.8 mm · Thread type: MF10x1 (fine pitch thread)
12,80 EUR
Explore categories from Speedometer & drive
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Length spring hook: 50 mm · Leg length: 45 mm · Ø outside: 30 mm · Area of application: Original · Material: Spring steel · Area of application: Standard · Surface: galvanized (blue) · Ø wire: 2.4 mm · Ø inside: 25.5 mm · Total length: 125 mm
5,75 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
3,30 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -30 - 220 °C · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
12,80 EUR
28,44 EUR/l
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Number of components: 1 pcs · Material: Rubber · Surface: raw · Place of use: Carburetor · Color: black · Ø inside: 17.2 mm · Ø outside: 20 mm · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
3,40 EUR
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Ø outside: 11.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm · Width across flats: 19 mm · Shank length: 100 mm
17,50 EUR
Working late? Evening hours on Thursday until 20:00
