Electronic ignition system with alternator compatible with your Puch 1-speed moped equipped with an E50 engine.
This magneto ignition system is designed for clockwise-rotating engines. The system is contactless and low-maintenance, as it uses neither a breaker nor a capacitor. The integrated, fully electronic ignition ensures a stable spark and can significantly improve starting performance and combustion compared to an older breaker ignition system.
The lighting output is 12 V / 100 W DC. This makes the system suitable for brighter lighting as well as for powering the battery, turn signals, and standard horn.
Scope of delivery:
• Rotor
•, pre-assembled stator unit
•, ignition coil with ignition cable
•, regulator/rectifier
•, blue cut-off cable
•, small parts
Notes:
The matching rotor puller (M27x1.25 / M12) is not included.
The charging system is designed for rechargeable 12 V lead-acid, AGM, or gel batteries. Detailed installation instructions are included.
You can find the matching pole puller, spark plug connectors, spark plugs, an ignition timing gauge, and an ignition timing adjustment tool among the accessories.
A quality product from the Czech manufacturer Vape.
Alternative to the original Puch part number: 349.1.50.000.0, 349.2.50.000.0
| Ø cable | 7 mm |
| Manufacturer | VAPE |
| Material | Metal, Plastic |
| Light coil voltage | 12 V |
| Direction of rotation | right |
| Ø mounting plate | 90 mm |
| Tension | 12 V |
| Mounting type | Nuts & bolts |
| Performance | 100 W |
| Ø Internal flywheel | 87.3 mm |
| Weight | 1650 g |
| Ø Flywheel outside | 103.7 mm |
| Number of fixing points | 7 pcs |
| Area of application | Tuning, Road use |
| Alternative version of the Puch OEM number | 349.1.50.000.0, 349.2.50.000.0 |
| Puch | E50 |
Accessories & related products
Buzzetti flywheel trigger combination M26x1.5 / M27x1.25
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: Buzzetti · Material: Steel · Surface: galvanized (blue) · Thread type: MF26x1.5 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
23,40 EUR
swiing® revival ignition plate 90 mm Bosch / DUCATI
Ø inside: 18.5 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Tension: 6 V · Cable length: 450 mm · Cable length: 550 mm · Ø bolt circle: 80 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Number of cables: 3 pcs · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
129,30 EUR
Hot 
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Racing · Area of application: Tuning · Light coil voltage: 12 V · Tension: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Number of fixing points: 3 pcs
317,60 EUR
Moped fans also bought
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Width: 150 mm · Height: 80 mm · Ø outside: 130 mm · Total length: 170 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
176,40 EUR
Hot
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black-matt · Ignition system: BOSCH · Ignition system: DUCATI · Width: 150 mm · Height: 88 mm · Total length: 160 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
176,40 EUR
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Area of application: (Dis)assembly tool · Total length: 120 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Number of components: 1 pcs · Diameter: 24 mm · Diameter: 40.3 mm
51,70 EUR
GPO ignition plate 6 / 12V CDI ignition
Manufacturer: GPO · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Area of application: Performance · Area of application: Standard · Ø inside: 18.5 mm · Cable length: 580 mm · Ø outside: 90 mm · Ø bolt circle: 80 mm · Tension: 6 V · Tension: 12 V · Number of fixing points: 4 pcs · Ø Internal flywheel: 90 mm · Number of cables: 2 pcs
105,80 EUR
Polini cylinder head for 38.4 - 43 mm cylinder | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Total length: 118 mm · Width: 85 mm · Ø cylinder: 38.4 - 43 mm · Height: 58 mm · Candle thread: long · Decompressor: Yes
64,60 EUR
Working late? Evening hours on Thursday until 20:00
